Denmat Distributors

• 4 x Restorite Bulk Fill (2gm)
• 1 x Restorite Bond 7G (5ml)
• 1 x Restorite Etching Gel (3ml)
• 1 x Aster Compo-Polishing Paste (4gm)

Releases fluoride 

Conseal f combines the proven SDI sealant technology with an intensive initial fluoride boost in conjunction with long term fluoride treatment. The unique Conseal f filler component, with its blend of particles and high surface-to-area volume ratios, enables high fluoride release. Fluoride enhances caries prevention, remineralization, and the inhibition of enamel demineralization.

Lowest viscosity

Conseal f is the lowest viscosity sealant. The ideal low viscosity allows Conseal f to fl ow faster and deeper into the prepared pits and fi ssures. A recognized cause of pit and fi ssure sealant failure is an inability to seal. The tighter seal optimizes Conseal f’s mechanical retention and eliminates the space required for bacteria to grow. Conseal f’s tight seal is further enhanced by its unique UDMA resin system’s lower shrinkage and by being BIS-GMA free, avoiding the controversy of Bisphenol A.

Low viscosity Super Etch LV

SDI has created a specialized blue gel 37% phosphoric acid etchant for sealants, in a direct delivery system. Super Etch LV’s lower viscosity improves the acid’s surface contact for deeper etchant penetration into the pits and fi ssures. The deeper acid penetration strengthens the mechanical bond and the retention success of Conseal f sealants.

Deepest penetration

Conseal f is available in direct placement syringes and single dose complets. Both have pre-bent, superfi ne dispensing tips which facilitate controlled, direct extrusion for faster procedures and allow direct dispensing into previously diffi cult to reach areas. The Conseal f nozzle, one third the size of other brands, enhances complete sealing and retention by allowing penetration into the deepest pits and fi ssures; crevasses that will not admit the dispensing tips of other materials

Range of colors

Conseal f is available in opaque white. Conseal is available in clear and light grey

Hygienic placement

The Conseal f complets offer a direct and hygienic way of dispensing the sealant, eliminating the risk of cross contamination

Bio compatible

Conseal f’s low water solubility minimizes breakdown of the sealant in the oral environment.

Contains filler

Conseal f is 7% fi lled with a submicron fi ller size of 0.04 microns to withstand surface wear.

Clinically proven

Conseal pit and fi ssure sealants are clinically proven. 5,363 Conseal sealants placed in 774 children found no failures due to the material and established that ”sealants contribute signifi cantly to dental public health

• One-step placement, no additional capping layer
• Excellent adaptation without additional expensive dispensing devices
• Stress relief to enable up to 5mm depth of cure
• Excellent handling and sculptability
• Available in capsule or syringe delivery in 5 shades: A1, A2, A3, B1, C2
• Fast and easy procedure

• Comprehensive dental product for post and core restorations
• Made of reinforced composite material
• High-strength "S" type glass fibers (approx. 60% composition)
• Epoxy resin matrix with a high conversion degree and glass transition temperature (Tg)
• Exceptional strength and durability
• Long-term stability for dental restorations
• Withstands challenging conditions like occlusal forces
• High flexure resistance of 1500 MPa
• High and balanced flexure elastic modulus of 60 GPa